6/12/2023 0 Comments Real magic em8300![]() ![]() ![]() There are two audio outputs on the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card: the Stereo Out and the S/PDIF connector. Connect the VGA cable from your VGA monitor to the VGA OUT of the DVD/MPEG-2 Playback Card. Attach the other end (15-pin "D" shape) of the cable to the output port on your VGA card or your PC's VGA output port.ģ. Attach the round 9-pin DIN connector of the provided External VGA Pass-Through Cable to the VGA IN connector at the back of the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card (refer to Figure 1).Ģ. (Refer to Figure 1 earlier in this Chapter for reference.) Follow the steps to connect the DVD/MPEG-2 Playback Card to your VGA output (see Figure 2).ġ. Your REALmagic Hollywood Plus DVD/MPEG-2 Playback Card must be connected to your VGA card or your PC's VGA output port in order to display MPEG video on your VGA monitor. This will not affect the audio of DVD-Video or DVD-ROM titles. Otherwise, you will not be able to play CD-Audio titles with the DVD-ROM drive. Note: If you are installing a DVD-ROM drive at the same time as the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card, remember to attach the CD-Audio cable from the DVD-ROM drive to your sound card. Here's a brief excerpt from the installation manual: Note: If you are installing a DVD-ROM drive at the same time as the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card, remember I've a REALmagic Hollywood Plus DVD/MPEG-2 Playback card.
0 Comments
Leave a Reply. |